COEX presents our unique elevated exhibition platform!

  • It’s clean and simple, providing 6m x 3m of elevated floorspace which you can configure to suit your needs.
  • There are only 4 clean corner posts. The step platform cantilevers off the edge of the platform structure. This enables full creative use of the area beneath the platform.
  • The stairs and step platform can be positioned around the entire perimeter, facing either way alongside the platform, or straight out from the platform.
  • The glass balustrades can be replaced with solid infill panels.

Please notice that the platform has sufficient clearance to permit a raised (32mm) floor and full-height Octanorm or Maxima Light structure beneath.

     
  • Power and other services can be reticulated up and down the corner posts and concealed in the ceiling void. The ceiling is made from a series of tiles of painted MDF and is fitted with a total of 18 halogen low-voltage downlights, capable of pivoting to highlight specific areas beneath the platform.
  • The platform can be fitted with plain white melamine flooring or a finish of your choice.
  • Steptreads can be ‘personalised’ i.e. printed, or treated to a nominated finish, i.e. carpet, marble effect or similar.
  • The structure is relatively quick to assemble. The platform comes prebuilt in 3 panels, which join together to form a 6m x 3m (nominal) area.
  • The platform is lifted by 2 x forklift trucks to enable the posts to be inserted and affixed. The step platform is then lifted and positioned where required.
  • This platform was designed in conjunction with a leading Australian structural engineer and complies with all requirements. Certification is available on request. Please note that COEX hold Copyright to the design, both structural and aesthetic.

The platform can be viewed at COEX’s warehouse based at Caringbah, NSW, Australia.

CLICK HERE TO RETURN TO COEX’s HOME PAGE